SM-16GT

SM-16GT responds to the demand of geothermal systems drilling between 100 and 250 metres.
The equipment's characteristics mean it can satisfy 70% of demand from the low-enthalpy geothermal sector. The compact drilling rig has a rubber tracked, 2300 mm-wide carriage and very low ground bearing pressure (0.65 Kg/cm2), thereby minimising damage to private property (gardens and courtyards) where domestic geothermal energy is used.

The drilling rig is equipped with fixed kinematic mechanism with a wide section mast, half-cylinder pull/push and a 19.5 ton pull capacity and 9.8 ton push power.

The rig is designed for rapid manoeuvring (0.2÷0,6 m/sec) and has a 200 kW, 2400 rpm diesel engine adapted to power the double rotary (upper 1100 daNm - bottom 3200 daNm), triple clamp and magnetic loading system to simultaneously manoeuvre rods/casings.

To keep weight to a minimum the drilling rig is not fitted with heavy and bulky casing/rod storage and is instead accompanied by an autonomous motorised rack system during operation.


Production Facility
PSM Spa
Via del Lavoro, 7
31011 Casella d’Asolo
Treviso, Italy
P: +39.0423.541211
F: +39.0423.756967
www.psmdrilling.it

Technical data

Technical data

Diesel engine kW 176
Weight t 15-17
Upper rotary max torque daNm 1100
Lower rotary max torque daNm 3200
Standard cradle stroke mm 4000
Max hoist kN 200
Max feed force kN 135
Clamping range mm 60-320
Track shoe width mm 400
Download
Related technologies
I cookie ci aiutano a fornire i nostri servizi. Utilizzando tali servizi, accetti l'utilizzo dei cookie da parte nostra. Info